5 Tips To Make Cleaning Weapons More Pleasant
The latest articles are fabric cleaning rags, a large and many small rags that can be thrown away after each cleaning. Remove the magazine before cleaning a weapon and check whether there is no round on the camera or in the barrel. Disassemble the weapon after unloading according to the manufacturer’s instructions and make sure that you are working in a ventilated area. Wrap a solvent-soaked plaster around a cleaning rod and push it over the entire barrel. Then change the brush and plaster to scrub the barrel until it is clean. Dry and lubricate the barrel, clean and lubricate the action with the pistol brush.
Place a cleaning mat on a flat surface like a workbench to protect the gun and the cleaner surface, dust residues and oil. A special cleaning set for measuring devices contains most, if not all, of the cleaning agents mentioned above. Other materials to consider are a rubber mat to protect all parts of the weapon plus their work surface. With long weapons, a cleaning crib is also useful to secure your weapon free of hands, so you can focus on controlling your tools and other loose parts. Goggles should always be used to protect eye injuries from flying feathers, waste and chemical splashes / vapors. It is also a good idea to wear solvent-resistant gloves to protect the skin from contact with chemicals and their absorption.
This should be used when cleaning the bedroom and you should use the right brushes and tools. If you clean your gun too often, you may be at risk of damaging the rifle or crown if you wear bad cleaning bars. This is the biggest problem since aluminum cleaning bars can easily scratch the inner barrel, provided it cleanses from the snout. Black powder is very caustic and most people do not properly clean their muzzle chargers before storage. Connect the cotton mop to the cleaning rod.
There is really no excuse for a dirty firearm, especially when shooting competitions. If you don’t know where to start, follow these proven weapon cleaning tips. And if you have a new weapon, some of these tips will help you prepare for the competition. When everything is said and done, your weapon will work properly and will likely be more accurate.
Some with lights at the end that make it easier for you to see the inside of the barrel. Armory Den Reduces time and makes work more efficient. Clean and lubricate the effect with solvent.
The muzzle protection prevents the cleaning rod from hitting the snout, which makes your weapon malfunction. For manual cleaning, I take out my Otis multi-purpose receiver brush. The large toothbrush-shaped head is ideal for general cleaning, but very small bristles on the other end are ideal for getting into tight spaces. With some old hoppes 9 and some soft cotton stains, I clean all the larger parts with solvent.
First use a dry hole brush to separate some of the larger dirt pieces. Then immerse a microfiber or a lint-free plaster in the drilling solvent and place it on your cleaning stick. Push it in, apply it well and let it work for the solvent for about 10 minutes. Although a lot of camera grease is removed from your locking rifle when cleaning the barrel, you still need special attention.
You can use the same rag to hit your cleaning bars once. Wash your hands too, as the likelihood that you will touch something else in the house and leave a handprint is quite good. Trust us, your partner will not appreciate it. Some people like to use a boring guide to keep the bar focused, but if you take your time and push the bars slowly and evenly, I’ve never found a need.
Use only tools and chemicals to maintain firearms. Be careful when working with solvents to avoid dripping on wood, lacquered surfaces, or other sensitive surfaces. Use a cleaning rod with the correct diameter.
Spray the action freely from the top of the frame / receiver so that carbon and metal waste can wash in the drip tray. Use the manufacturer’s recommendations for your particular model. Use the appropriate disposal methods for cleaning residues. Once everything is cleaned and cleaned, it’s time to put your gun back together. During this process, you would like to carefully examine each part during the joint and pay attention to damage, irregularities or excessive wear or play . Other damage not only damages the value of your weapon, but can also lead to potential security problems.